LuK DMF Manu
Manufacturer’s Warranty : 12 months/12,000 miles
Easy Return : We’re only happy if you’re happy. If you’re not entirely satisfied with your order, you may be entitled to a refund.
Fast Shipping : We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
$206.46 $224.41
8% Off
SKU | LKDMF066 |
---|---|
Brand | LUK® |
Part Name | Clutch Flywheel |
Part | # DMF066 |
UPC | # 00670774133725 |
Quantity Per Vehicle | 1 |
Pack of | 1 |
Condition | New |
LuK: Don’t gamble – stay with the original LuK DMF! The LuK DMF prevents damages solid flywheels may cause. The LUK Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.
Torque Capacity DMFW (inch) | - | 9.2913 |
---|---|---|
Torque Capacity DMFW (mm) | - | 236 |
Bolt hole PCD crankshaft (inch) | - | 2.7559 |
Bolt hole PCD crankshaft (mm) | - | 70 |
Bolt hole PCD clutch pres.plte (inch) | - | 10.2362 |
Bolt hole PCD clutch pres.plte (mm) | - | 260 |
Flywheel Friction Surface Inner diameter (inch) | - | 6.5748 |
Flywheel Friction Surface Inner diameter (mm) | - | 167 |
Ring Gear Thickness (inch) | - | 2.0067 |
Ring Gear Thickness (mm) | - | 50.97 |
Flywheel friction surface outer diameter (inch) | - | 9.4488 |
Flywheel friction surface outer diameter (mm) | - | 240 |
Dowel Hole Pattern | - | 5 |
Bolt Hole Pattern | - | 2 |
Number of teeth, starter ring gear | - | 135 |
I.D. for Pilot (inch) | - | 1.2579 |
I.D. for Pilot (mm) | - | 31.95 |
Flywheel Thickness [mm] (inch) | - | 2.0067 |
Flywheel Thickness [mm] (mm) | - | 50.97 |
Dowel hole diameter (inch) | - | 0.2362 |
Dowel hole diameter (mm) | - | 6 |
Crank Hole Dia. (inch) | - | 0.4508 |
Crank Hole Dia. (mm) | - | 11.45 |
Cup depth, secondary flywheel (inch) | - | -0.252 |
Cup depth, secondary flywheel (mm) | - | -6.4 |
Ring Gear To Friction Surface (inch) | - | 1.6843 |
Ring Gear To Friction Surface (mm) | - | 42.78 |
Centering diameter / dowel hole (inch) | - | 10.2362 |
Centering diameter / dowel hole (mm) | - | 260 |
Overall Casting O.D. (inch) | - | 10.8228 |
Overall Casting O.D. (mm) | - | 274.9 |
Ring Gear Mounting O.D. (inch) | - | 10.0472 |
Ring Gear Mounting O.D. (mm) | - | 255.2 |
Ring Gear Major Dia. (inch) | - | 11.239 |
Ring Gear Major Dia. (mm) | - | 285.47 |
Flange Thickness (inch) | - | 0.6839 |
Flange Thickness (mm) | - | 17.37 |
Crank To Friction Surface (inch) | - | 1.6791 |
Crank To Friction Surface (mm) | - | 42.65 |
Show All |