LuK DMF Manu
Manufacturer’s Warranty : 12 months/12,000 miles
Easy Return : We’re only happy if you’re happy. If you’re not entirely satisfied with your order, you may be entitled to a refund.
Fast Shipping : We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
Only 6 left in stock - order soon.
SKU | LKDMF173 |
---|---|
Brand | LUK® |
Part Name | Clutch Flywheel |
Part | # DMF173 |
UPC | # 00670774369285 |
Quantity Per Vehicle | 1 |
Pack of | 1 |
Condition | New |
LuK: Don’t gamble – stay with the original LuK DMF! The LuK DMF prevents damages solid flywheels may cause. The LUK Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.
Bolt hole PCD crankshaft (inch) | - | 2.2776 |
---|---|---|
Bolt hole PCD crankshaft (mm) | - | 57.85 |
Centering diameter / dowel hole (inch) | - | 9.9126 |
Centering diameter / dowel hole (mm) | - | 251.78 |
Ring Gear Mounting O.D. (inch) | - | 9.8126 |
Ring Gear Mounting O.D. (mm) | - | 249.24 |
Flywheel Thickness [mm] (inch) | - | 2.3398 |
Flywheel Thickness [mm] (mm) | - | 59.43 |
Dowel Hole Pattern | - | 5 |
Ring Gear To Friction Surface (inch) | - | 1.152 |
Ring Gear To Friction Surface (mm) | - | 29.26 |
Bolt hole PCD clutch pres.plte (inch) | - | 9.9126 |
Bolt hole PCD clutch pres.plte (mm) | - | 251.78 |
Ring Gear Major Dia. (inch) | - | 10.6795 |
Ring Gear Major Dia. (mm) | - | 271.26 |
Cup depth, secondary flywheel (inch) | - | -0.5811 |
Cup depth, secondary flywheel (mm) | - | -14.76 |
Crank Hole Dia. (inch) | - | 0.4126 |
Crank Hole Dia. (mm) | - | 10.48 |
Flywheel friction surface outer diameter (inch) | - | 9.3307 |
Flywheel friction surface outer diameter (mm) | - | 237 |
Dowel hole diameter (inch) | - | 0.2362 |
Dowel hole diameter (mm) | - | 6 |
Crank To Friction Surface (inch) | - | 1.4398 |
Crank To Friction Surface (mm) | - | 36.57 |
Overall Casting O.D. (inch) | - | 10.5563 |
Overall Casting O.D. (mm) | - | 268.13 |
Ring Gear Thickness (inch) | - | 0.3295 |
Ring Gear Thickness (mm) | - | 8.37 |
Flywheel Friction Surface Inner diameter (inch) | - | 5.8465 |
Flywheel Friction Surface Inner diameter (mm) | - | 148.5 |
I.D. for Pilot (inch) | - | 1.1024 |
I.D. for Pilot (mm) | - | 28 |
Number of teeth, starter ring gear | - | 127 |
Bolt Hole Pattern | - | 2 |
Show All |