Your Vehicle 1909 Stevens-Duryea Model XXX Parts's

Change Vehicle

Cardone® 18-4298XR Disc Brake Caliper

Manufacturer #18-4298XR

Cardone® 18-4298XR Disc Brake Caliper

Manufacturer #18-4298XR

$77.44

$86.04

Save $8.60 (10%)

Includes $24.30 Refundable Core Deposit

free-shipping

Only 2 left in stock – order soon

Share :

This part does not fit your selected vehicle 1909 Stevens-Duryea Model XXX

Change vehicle | View Correct Part

Free & Fast Shipping

We ship fast so you can get on the road that much faster

100% Safety

Only secure payments

SKU A1184298XR
Brand Cardone®
Part Name Disc Brake Caliper
Part # 18-4298XR
Quantity Per Vehicle 1
Pack of 1
Condition Remanufactured
Manufacturer’s Warranty 24 months / 24,000 Miles

  • + Chevrolet
  • + Dodge
  • + Gmc

  • Remanufactured Unloaded Caliper w/Color Coating
  • For a premium appearance and enhanced protection against corrosion and rust, CARDONE Color-Coated Calipers feature a weather-proof coating available in red or yellow. Each caliper is built with brand-new, premium components to guarantee exceptional braking performance and longevity. They are also tested to meet rigorous standards and packaged with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
  • Coated Calipers feature an exclusive weather-proof coating that stops rust from forming and a showroom appearance.
  • Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
  • Pistons are durable, resistant to cracking or pitting and handle great loads.
  • Mounting bracket is included where applicable for a hassle-free installation.
  • New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
  • New bleeder screws provide trouble-free bleeding and a positive seal.
  • New washers are included where applicable for a proper seal.
  • A plastic cap plug protects every brake port thread to ensure a trouble free installation.
  • New stainless steel hardware clips and new mounting pins are included where applicable.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

Abutment Clips Included No
Anti-Rattle Spring Included No
Bleeder Screw Included Yes
Bleeder Screw Quantity 1
Bracket Included No
Caliper Casting Material Cast iron
Caliper Color Red
Caliper Finish Powder coated
Caliper Slides Included Yes
Caliper Type Floating
Grade Type Regular
Inlet Fitting Type Banjo
Inlet Thread Size M10x1.5
Mounting Bolt Included Yes
Mounting Bracket Included No
Mounting Hardware Included Yes
Mounting Hole Diameter (IN) 0.697
Mounting Hole Diameter (MM) 17.69683
Mounting Hole Thread Diameter (IN) 0.697
Mounting Hole Thread Diameter (MM) 17.69683
Pad Wear Sensor Included No
Pads Included No
Piston Diameter (MM) 79.883
Piston Diameter (IN) 3.145
Piston Material Steel
Piston Quantity 1
Bleeder Screw Cap Included No
Rust Resistant Coating Yes
Dust Boots Included Yes
Bleeder Thread Size M10x1.5
Inlet Port Size (IN) 0.394
Inlet Port Size (MM) 10.00366
Product Condition Remanufactured
Package Contents Caliper; instruction sheet; hardware kit
E-Waste No
Contains Electronic Components No
Does it require SDS No
Is Item A Chemical No
Is Or Contains A Battery No
Is Or Contains A Bulb No
Is Prop Sixty Five Affected No
Is the item CARB affected No
FAQ_Q1 What colors are the coated calipers available in?
FAA_A1 Our coated calipers are currently available in silver, blue, yellow and red.
FAQ_Q2 Can i switch out a phenolic piston caliper for a steel piston caliper or vice versa?
FAA_A2 Not recommended. the o.e. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. it is recommended that the installer follow the manufacturer’s recommendations.
FAQ_Q3 What type of fluid should i use: dot 3, dot 4, or dot 5?
FAA_A3 As a rule, always use brake fluid recommended by o.e. the fluid type is stamped on the master cylinder reservoir lid. always use new fluid in a sealed container.
FAQ_Q4 Car pulls to one side during braking. why?
FAA_A4 Inspect both calipers for binding or sticky slides or pins. also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
FAQ_Q5 Brakes squeal all of the time. what's causing the squeal?
FAA_A5 Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
FAQ_Q6 Could calipers be the cause of a low brake pedal?
FAA_A6 A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
FAQ_Q7 What type of grease is used on floating caliper mounting pins?
FAA_A7 A silicone grease is used on floating caliper mounting pins.
FAQ_Q8 Do all of your calipers come with the new hardware and a mounting bracket for installation?
FAA_A8 New hardware is included with all of our calipers however the mounting bracket is an added option depending on part number and application. mounting brackets are also sold separately for most applications.

Shipping Policy

We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.

Return Policy

We’re only happy if you’re happy. If you’re not entirely satisfied with your order, you may be entitled to a refund.

Warranty Policy

Right parts, guaranteed. If you find any defects, simply notify us within the warranty period, and we’ll take care of it. Check out our Warranty Policy for more details.

Similar Products
Recently Viewed
My Cart
Cart Page
My Wishlist
Wishlist Page