Cardone® 26-6001 Rack and Pinion Assembly
Manufacturer #26-6001
Cardone® 26-6001 Rack and Pinion Assembly
Manufacturer #26-6001
$396.77
$431.27
Save $34.50 (8%)
Includes $54.90 Refundable Core Deposit
Out of Stock
Get it between Mon, Nov 10 - Wed, Nov 12, 2025
This part does not fit your selected vehicle 2024 Polestar Polestar 2
Change vehicle | View Correct PartFast Shipping
We ship fast so you can get on the road that much faster100% Safety
Only secure payments| SKU | A1266001 |
|---|---|
| Brand | Cardone® |
| Part Name | Rack and Pinion Assembly |
| Part | # 26-6001 |
| Quantity Per Vehicle | 1 |
| Pack of | 1 |
| Condition | Remanufactured |
| Manufacturer’s Warranty | 36 Months / 36,000 Miles |
-
Jaguar
- Rack and Pinion Assembly
- Rack and Pinion, Rack and Pinion Complete Unit, Complete Rack, EPS
- Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
- 100% replacement of rubber sealing components.
- All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
- Application of specialized lubricant(s) for extended life.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- Finished in protective coating to prevent corrosion and rust.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
- Valve housings have polished micro-finish sleeves for durability (where applicable).
| Casting Material | Steel; aluminum |
|---|---|
| Package Contents | Rack and pinion, evo kit, instuction sheet |
| Product Condition | Remanufactured |
| Number of Mounting Holes | 4 |
| Hose Port Type | O-ring |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 2.81 |
| Pressure Port Thread Size | M16 x 1.5 |
| Return Port Thread Size | M16 x 1.5 |
| E-Waste | No |
| Rack Length (mm) | 1177.93 |
| Thread Length (in) | 2.03 |
| Thread Length (mm) | 51.44 |
| Distance Between Mounting Holes (in) | 23.06 |
| Distance Between Mounting Holes (mm) | 585.80 |
| Steering Rack Color | Black |
| Input Shaft Diameter (in) | 0.75 |
| Input Shaft Diameter (mm) | 19.00 |
| Input Shaft Length (in) | 1.13 |
| Input Shaft Length (mm) | 28.58 |
| Rack Length (in) | 46.38 |
| FAQs | For the first few minutes of driving my car, the steering is hard. is the rack and pinion bad or the power steering pump? |
| FAQs | I replaced the rack and now the power steering pump is whining. what happened? it never did this before! |
| FAQs | Steering not returning to center coming out of a turn. what could be causing this? |
| FAQs | The most likely cause of power steering pump whine is air in the system. the steering system must be bled completely. |
| FAQs | The rack and pinion does not return to center by itself. the geometry of the front suspension causes the wheels to return to center coming out of a turn. if the vehicle will not return to center, first, check the front end alignment, then, check for a restricted return line in the power steering system. if the return line is restricted or kinked, this could be blocking the flow of fluid back to the pump. |
| FAQs | This symptom is classified as 'morning sickness'. this condition is caused by teflon sealing rings on the spool valve wearing grooves in the aluminum housing of the rack and pinion resulting in an internal bypass of pressure. once the housing warms up, the metal will expand and reduce the pressure loss. the rack and pinion must be replaced. |
| Features and Benefits | 100% replacement of rubber sealing components. |
| Features and Benefits | All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable). |
| Features and Benefits | Application of specialized lubricant(s) for extended life. |
| Features and Benefits | As a remanufactured original equipment part, this unit guarantees a perfect vehicle fit. |
| Features and Benefits | Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications. |
| Features and Benefits | Finished in protective coating to prevent corrosion and rust. |
| Features and Benefits | Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%. |
| Features and Benefits | Valve housings have polished micro-finish sleeves for durability (where applicable). |
Jaguar Vanden Plas 1997-95, XJ6 1997-95, XJR 1997-95
Shipping Policy
We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
Return Policy
We’re only happy if you’re happy. If you’re not entirely satisfied with your order, you may be entitled to a refund.
Warranty Policy
Right parts, guaranteed. If you find any defects, simply notify us within the warranty period, and we’ll take care of it. Check out our Warranty Policy for more details.
$396.77
$431.27
Save $34.50 (8%)
Includes $54.90 Refundable Core Deposit
Loading items for your vehicle…
Loading similar products…
Loading your recently viewed…
